Home

Installation Guide
UV/10 Specifications
Automatic Mode Wiring Diagram
Manual Mode Wiring Diagram
Important Precautions
Installation Diagram


   UV/10- Specifications*

SIZE: 14" x 12" x 6-5/8" (HWD)
MOUNTING: Vertical, Mounting holes provided
WEIGHT: 34 Pounds
POWER INPUT: 115 VAC, 2 Amp Draw
115 VAC, 20 Amp Pass-thru
BATTERY BUSS: 48 VDC, 7Ahr Sealed Battery Pack
POWER OUTPUT: 60 Hz Synthesized sine wave
115 VAC +/- 10%
6.8 Amp continuous current
16 Amp RMS peak current on start
Powers most 1/3 & 1/2 HP motor systems, to 16 Amps start current
PROTECTION: Input protected by MOV circuit
HOUSING: Powder-coated metal enclosure suitable for outdoor use. Lock provided.
TRIGGER INPUTS: Optional manual SPST switch can be lock box mounted
TRIGGER OUTPUT: SPST Dry contact, normally wired to 'OPEN' contact on the host operator
OPERATING MODES: Auto Open: Triggers gate to automatically open upon power failure.
Manual: Typical lock box operation, remote operation via switch.
OPTIONS: Dual Gate Module. Provides 2 output triggers for sequential opening of Entry-Exit gates.


*Specifications subject to change Copyright 5/2/95
     
PowerGuard 2004, All rights reserved